10 GALLON ROSS MIX CANS – STAINLESS STEEL – JACKETED (4) AVAILABLE #8534

10 gallon ross mix cans

4 – used 10 gallon Ross Mix Cans. Stainless steel construction. These mix cans were last used with a Ross model HDM-10 mixer. All are jacketed. All are on casters for portability. All are 18 in. inside diameter and 13 1/2 in. inside height to lip.

Breakdown of each unit on 2/6/20:

Can #1 (marked “2B”)
Stainless bowl
Stainless jacket
Center flush bottom 2″ ball valve
1 1/4″ RTD temperature probe on side
2 Grab handles on sides
Jacket has fittings
2 positioning blocks and 2 pin plates
Casters set up to work with a 8″ high mixer base (measured from floor to bottom of pin plate)

Can #2 (marked “C”)
Stainless steel bowl
Carbon steel jacket
Front 2″ cove-cut plug outlet; part on outside of bowl has 3″ male threads
No RTD probe
Removable stainless cart handle
No jacket fittings
2 positioning blocks and 2 pin plates
Casters set up to work with a 8″ high mixer base
New polyurethane wheels (4″ x 1 1/2″ Colson)

Can #3 (marked “1 C”)
Stainless steel bowl
Carbon steel jacket
Front 1 1/2″ cove-cut plug outlet; part on outside of bowl has 2 1/2″ male threads
No RTD probe
Removable stainless cart handle
Jacket has fittings
2 positioning blocks and 2 pin plates
Casters set up to work with a 8″ high mixer base
New polyurethane wheels

Can #4 (marked “C”)
Stainless steel bowl
Carbon steel jacket
Front bottom 1″ outlet
No RTD probe
2 Grab handles on corners
2 lifting ears on sides
Jacket has fittings
2 positioning blocks and 2 pin plates
Casters set up to work with a 7 1/2″ high mixer base
New polyurethane wheels

(1) with stainless jacket
(3) with carbon steel jackets (take $1,000 off for c/s)

F.O.B. – LOCATION

  • SKU: 8534
  • Manufacturer: Ross
8534w_2_xl
8534w_3_xl
8534w_4_xl
8534w_5_xl
8534w_6_xl
8534w_7_xl
8534w_8_xl
8534w_9_xl

4 – used 10 gallon Ross Mix Cans. Stainless steel construction. These mix cans were last used with a Ross model HDM-10 mixer. All are jacketed. All are on casters for portability. All are 18 in. inside diameter and 13 1/2 in. inside height to lip.

Breakdown of each unit on 2/6/20:

Can #1 (marked “2B”)
Stainless bowl
Stainless jacket
Center flush bottom 2″ ball valve
1 1/4″ RTD temperature probe on side
2 Grab handles on sides
Jacket has fittings
2 positioning blocks and 2 pin plates
Casters set up to work with a 8″ high mixer base (measured from floor to bottom of pin plate)

Can #2 (marked “C”)
Stainless steel bowl
Carbon steel jacket
Front 2″ cove-cut plug outlet; part on outside of bowl has 3″ male threads
No RTD probe
Removable stainless cart handle
No jacket fittings
2 positioning blocks and 2 pin plates
Casters set up to work with a 8″ high mixer base
New polyurethane wheels (4″ x 1 1/2″ Colson)

Can #3 (marked “1 C”)
Stainless steel bowl
Carbon steel jacket
Front 1 1/2″ cove-cut plug outlet; part on outside of bowl has 2 1/2″ male threads
No RTD probe
Removable stainless cart handle
Jacket has fittings
2 positioning blocks and 2 pin plates
Casters set up to work with a 8″ high mixer base
New polyurethane wheels

Can #4 (marked “C”)
Stainless steel bowl
Carbon steel jacket
Front bottom 1″ outlet
No RTD probe
2 Grab handles on corners
2 lifting ears on sides
Jacket has fittings
2 positioning blocks and 2 pin plates
Casters set up to work with a 7 1/2″ high mixer base
New polyurethane wheels

(1) with stainless jacket
(3) with carbon steel jackets (take $1,000 off for c/s)

F.O.B. – LOCATION

  • SKU: 8534
  • Manufacturer: Ross
Share this Product: