Out of Stock SOLD. NEED ONE LIKE THIS? LET US HELP.CONTACT US

32 LITER / 8 GALLON AMK MIXTRUDER – S/S – VACUUM – JACKETED – #8939

32 LITER MIXER EXTRUDER

1 – used AMK 32 Liter Capacity Mixtruder. Serial #C12647. All stainless steel contact surfaces. Mixing bowl measures approx. 13 in. x 13 3/8 in. x 13.5 in. deep and has Double Arm Sigma Blades Dome type air operated vacuum cover with (3) inlets: flanged vacuum & (2) female NPT inlets set up with vacuum break and temperature probe inlet. Chamber is rated for -1 bar. Mixer and extrusion screw are fully jacketed and rated for 3 bar (43.5 psi) @ 250 deg. C (482 deg. F). Mixing chamber has side temperature well. All shafts are packing gland sealed. Extrusion screw is approx. 4.5 in. OD and extends 15 in. out of mixing chamber. Screw has bolt on O Ring sealed end cap for use during vacuum processing and short bolt on discharge sleeve. Unit is driven by 15 HP and 5 HP Reliance “XE” Energy Efficient Motors through multi shaft output main gearbox by Pekrun, model DSR171 with pumped oil recirculation. Motors are 3 phase 230/460V @ 1765 & 1750 RPM. Mixer is mounted on a painted steel floor base approx. 49 in. x 132 in. long with corner mounted bolted feet. Last used for dental products manufacturing. F.O.B. – LOCATION

32 LITER AMK MIXTRUDER (1)
AMK MIXER EXTRUDER
32 LITER AMK MIXTRUDER
mixtruder blades
32 liter amk mixtruder
32 LITER AMK MIXTRUDER (3)
32 LITER AMK MIXTRUDER (2)

1 – used AMK 32 Liter Capacity Mixtruder. Serial #C12647. All stainless steel contact surfaces. Mixing bowl measures approx. 13 in. x 13 3/8 in. x 13.5 in. deep and has Double Arm Sigma Blades Dome type air operated vacuum cover with (3) inlets: flanged vacuum & (2) female NPT inlets set up with vacuum break and temperature probe inlet. Chamber is rated for -1 bar. Mixer and extrusion screw are fully jacketed and rated for 3 bar (43.5 psi) @ 250 deg. C (482 deg. F). Mixing chamber has side temperature well. All shafts are packing gland sealed. Extrusion screw is approx. 4.5 in. OD and extends 15 in. out of mixing chamber. Screw has bolt on O Ring sealed end cap for use during vacuum processing and short bolt on discharge sleeve. Unit is driven by 15 HP and 5 HP Reliance “XE” Energy Efficient Motors through multi shaft output main gearbox by Pekrun, model DSR171 with pumped oil recirculation. Motors are 3 phase 230/460V @ 1765 & 1750 RPM. Mixer is mounted on a painted steel floor base approx. 49 in. x 132 in. long with corner mounted bolted feet. Last used for dental products manufacturing. F.O.B. – LOCATION

Out of stock

Share this Product:
SKU: 8939 Category: