Out of Stock SOLD. NEED ONE LIKE THIS? LET US HELP.CONTACT US

5 CU. FT. JDA PROGRESS PHARMA GRADE RIBBON BLENDER – S/S – UNUSED

1 – UNUSED 5 cu. ft. Double Ribbon Blender manufactured by JDA Progress. Model R5. Pharmaceutical grade internals with mirror finish. Polished external finish. Trough measures 35 in. long x 24 in. deep x 21.5 in. wide. 4.8 kw drive (250/440V) 1716 RPM, (4.0 kw @ 220/380V) 1430 RPM. Direct coupled to 90:1 on shaft gear reducer for approx. 20 RPM final output. Full top hinged cover with O-Ring gasket, two locking adjustable tension closures and two hydraulic assist lift pistons. Removable dump grate with proximity sensor interlock (prevents operation with grate removed). Air purged shaft seals. Approx. 6 in. center bottom outlet with air operated butterfly valve. Approx. 37 in. under clearance from valve. Mounted on stainless steel stand. Factory controls with Omron mixing timer, start/stop, E-Stop, valve and air seal controls and disconnect switch. Wired for 400 V-N service, 15 amp/3 phase. 60 psi @ 3 cfm required. Unit is still on original factory shipping skid. Blender was originally purchased for pharmaceutical application but never installed. F.O.B. – LOCATION F.O.B. – LOCATION

  • SKU: 8760
  • Model #: R-5
  • Manufacturer: JDA Progress
8760w_2
8760w_3
8760w_4
8760w_5
8760w_6
8760w_8
8760w_9
8760w_10
8760w_11
8760w_12

1 – UNUSED 5 cu. ft. Double Ribbon Blender manufactured by JDA Progress. Model R5. Pharmaceutical grade internals with mirror finish. Polished external finish. Trough measures 35 in. long x 24 in. deep x 21.5 in. wide. 4.8 kw drive (250/440V) 1716 RPM, (4.0 kw @ 220/380V) 1430 RPM. Direct coupled to 90:1 on shaft gear reducer for approx. 20 RPM final output. Full top hinged cover with O-Ring gasket, two locking adjustable tension closures and two hydraulic assist lift pistons. Removable dump grate with proximity sensor interlock (prevents operation with grate removed). Air purged shaft seals. Approx. 6 in. center bottom outlet with air operated butterfly valve. Approx. 37 in. under clearance from valve. Mounted on stainless steel stand. Factory controls with Omron mixing timer, start/stop, E-Stop, valve and air seal controls and disconnect switch. Wired for 400 V-N service, 15 amp/3 phase. 60 psi @ 3 cfm required. Unit is still on original factory shipping skid. Blender was originally purchased for pharmaceutical application but never installed. F.O.B. – LOCATION F.O.B. – LOCATION

  • SKU: 8760
  • Model #: R-5
  • Manufacturer: JDA Progress

Out of stock

Share this Product:
SKU: 8760 Category: