NEW - 50 CU. FT. RIBBON BLENDER - S/S - 20 HP
1 - New 50 Cubic Foot Working Capacity Stainless Steel Double Ribbon Blender. Overall Capacity: 1800L, working capacity is 1400L Features: 304 Stainless Steel Construction, (mirror finish ribbons) controls, and Teflon air seals. With safety sensors on the lid, pneumatic flap discharge, Floor to Discharge: (customer to specify) Electrics: 3 Phase / 60 Hertz / 220Volts Delivery: Approx. 10 weeks from receipt of 65% Deposit.(balance prior to shipment from factory) Selling Price: FOB Toronto…Limited Warranty
(*plus shipping and customs/duties to USA)
*Option - Partial open discharge door to control the flow.......add $945.00
Description: The Horizontal Ribbon Mixer consist of U-Shape tank, spiral and drive parts. The spiral is dual structure. Outer spiral makes the material move from the sides to the center of the tank and the inner screw conveyor the material from the center to the sides to get the convective mixing. Our DP series Ribbon mixer can mix many kinds material especially for the powder and granular which with stick or cohesion character, or add a little liquid and paste material into powder and granular material. Mixture effect is high. Cover of the tank can be made to open to clean and change parts easily.
Main features: MF-RM series mixer with Horizontal tank , single shaft with dual spiral symmetry circle structure. Top cover of U-Shape tank has the entrance for material. It can be also designed with spray or add liquid device according the customer’s needs. Inside the tank there equipped the axes rotor which consists of, cross support and spiral ribbon. Under the bottom of the tank, there has a flap dome valve (pneumatic control or manual control) of the center. The valve is arc design that assure no material deposit and without no dead angle when mixing. Reliable regula- seal prohibit the leakage between the frequent close and open. The disconnected ribbon of the mixer can make the material mixed with more high speed and uniformity in short time. This mixer also can be designed with the function to keep cold or heat. Add one layer outside the tank and put into medium into the interlayer to get the mixing material cold or heat. Usually use water for cool and hot steam or use electrical for heat Looking forward to hearing from you soon in regards to the above mentioned machinery.