10 HP HIGH SPEED DISPERSER – UL LISTED – AIR/OIL LIFT (#9571)

Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP4 high-speed disperser has the power you need to get the job done. For products let than 15,000 cps you can calculate the required horsepower for your dissolver by dividing your required volume by 10. For example, a 30 Gal batch would normally require 3 HP to disperse. The dimensions on the high shear, high-speed disperser allow for a 48” lift and a 40” diameter vessel.  The air over oil lift moves smoothly in and out of position using a 3-way air valve, allowing the high-speed dispersion blade to be placed at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities.  Changing out the blade on the DP4 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds on the dissolver are controlled by a local explosion proof controller that communicates with a digital speed controller that is mounted outside of the rated area. The speed range for this unit is 0-1400 RPM.  A 2″ 316SS shaft is standard on all DP4 units, precision ground, and polished along its entire length for high-speed mixer service.
Customizations and options on these units include container holders, slower or faster speed ranges, explosion-proof tachometers, and a variety of lift heights.

  • SKU: 9571
  • Model #: 10 HP DP4
  • Manufacturer: MXD Process / Mixer Direct

Whether you are mixing coatings, cosmetics, or need some extra shear to get to a proper final solution, the DP4 high-speed disperser has the power you need to get the job done. For products let than 15,000 cps you can calculate the required horsepower for your dissolver by dividing your required volume by 10. For example, a 30 Gal batch would normally require 3 HP to disperse. The dimensions on the high shear, high-speed disperser allow for a 48” lift and a 40” diameter vessel.  The air over oil lift moves smoothly in and out of position using a 3-way air valve, allowing the high-speed dispersion blade to be placed at any position inside the mixing container. This is important if you are going to be dispersing products at a variety of viscosities.  Changing out the blade on the DP4 for your different chemistries can be done in less than 30 seconds. A huge variety of blades are available for the unit allowing for higher shear levels all the way to high pumping blades for high viscosity materials. Speeds on the dissolver are controlled by a local explosion proof controller that communicates with a digital speed controller that is mounted outside of the rated area. The speed range for this unit is 0-1400 RPM.  A 2″ 316SS shaft is standard on all DP4 units, precision ground, and polished along its entire length for high-speed mixer service.
Customizations and options on these units include container holders, slower or faster speed ranges, explosion-proof tachometers, and a variety of lift heights.

  • SKU: 9571
  • Model #: 10 HP DP4
  • Manufacturer: MXD Process / Mixer Direct
Share this Product: