100 TON 4 POST HYDRAULIC PRESS – 18 in. X 18 in. – NEW (#2006)

18 x 18 100 ton hydraulic press

1 – NEW Model RCM 100-18-18 cabinet style self-contained hydraulic press.
8″ dia., 12″ stroke heavy duty ram @ 4000 PSI= 100 Ton.
3″ dia. strain rods.
6″ thick solid steel cross head.
6″ thick solid steel bolster table fully guided via 360 deg. bronze guide bushings.
Standard press to be fitted with (2) two 2″x18″x18″ 480/3/60 electrically heated platens with 0-800 deg. F temperature controllers. Each platen to have (10) ten 850 shaded watt density heaters. Platens capable of ambient to 450 deg. F operating temperature in 50/60 minutes.
Single 13″ daylight opening between platens
19″ left-right between strain rods.
9½” front-back between strain rods.
Self-contained Vickers 4000 PSI hydraulic unit is a 10 gallon Reservoir, mounted within confines of cabinet base. Hydraulic unit is driven by 5 HP, 220/440/3/60 motor using a 15 GPM pump. Ram speed is 69″/minute.
Operator’s Control Panel to consist of:
0-800 deg. platen temperature controllers
Dual anti-tie down palm buttons for close
Single push button for open.
Adjustable hydraulic control switch for 5-100 ton operation.
Allen Bradley Micrologix programmable controller.
Proface AGP 4300 HMI with Recipe management.
Power Requirement: 240 : 480
Platens 2 @ 20/10 AMPS each 40.0 Amps @ 240 : 20.0 Amps @ 480
Hyd. Unit 5 HP drive motor 14.0 Amps @ 240 : 7.6 Amps @ 480
Control Voltage 120/1/60 2.0 Amps @ 240 : 1.0 Amps @ 480

TOTAL 56.0 Amps @ 240 : 28.6 Amps @480
Overall dimensions: 46″ left-right, 36″ deep, 47″ tall
Approximate Weight: 6,900#

SELLING PRICE WITH ONE YEAR WARRANTY

OPTIONS:
a) Each additional platen and temperature controller – add $tbd
b) NEW electrically heated 18″ x18 ” x3″ water cooled platens with valving for water cooled and air pressurized air purging – add $tbd
c) Mold work table with bronze guide rails mounted to front of press – $tbd
d) Dual, sandwiched intermediate platen assembly, longer strain rods to render two (2) 6″ daylight openings, 1/2 Glastherm mounted on all four sides of each platen. Platens wired to separate temperature controllers, add – $tbd
e) Additional daylight opening over 13″ total add $tbd per inch
f) Power requirement for 240/3/60 upgrade sizing of electrics, ADD $tbd

F.O.B. – N.E. OHIO LOCATION

TERMS – 50% WITH ORDER TO BEGIN CONSTRUCTION
50% BALANCE DUE UPON COMPLETION OF CONSTRUCTION, PRIOR TO SHIPMENT.

12-14 week delivery from receipt of order and 50% deposit.Balance due upon completion prior to shipment.F.O.B. – N.E. OHIO LOCATION

  • SKU: 2006
  • Model #: RCM 100-18-18
2006w_1_xl
2006w_2_xl
2006w_3_xl
2006 – 18 X 18 HYDRAULIC PRESS – HEATED PLATENS

1 – NEW Model RCM 100-18-18 cabinet style self-contained hydraulic press.
8″ dia., 12″ stroke heavy duty ram @ 4000 PSI= 100 Ton.
3″ dia. strain rods.
6″ thick solid steel cross head.
6″ thick solid steel bolster table fully guided via 360 deg. bronze guide bushings.
Standard press to be fitted with (2) two 2″x18″x18″ 480/3/60 electrically heated platens with 0-800 deg. F temperature controllers. Each platen to have (10) ten 850 shaded watt density heaters. Platens capable of ambient to 450 deg. F operating temperature in 50/60 minutes.
Single 13″ daylight opening between platens
19″ left-right between strain rods.
9½” front-back between strain rods.
Self-contained Vickers 4000 PSI hydraulic unit is a 10 gallon Reservoir, mounted within confines of cabinet base. Hydraulic unit is driven by 5 HP, 220/440/3/60 motor using a 15 GPM pump. Ram speed is 69″/minute.
Operator’s Control Panel to consist of:
0-800 deg. platen temperature controllers
Dual anti-tie down palm buttons for close
Single push button for open.
Adjustable hydraulic control switch for 5-100 ton operation.
Allen Bradley Micrologix programmable controller.
Proface AGP 4300 HMI with Recipe management.
Power Requirement: 240 : 480
Platens 2 @ 20/10 AMPS each 40.0 Amps @ 240 : 20.0 Amps @ 480
Hyd. Unit 5 HP drive motor 14.0 Amps @ 240 : 7.6 Amps @ 480
Control Voltage 120/1/60 2.0 Amps @ 240 : 1.0 Amps @ 480

TOTAL 56.0 Amps @ 240 : 28.6 Amps @480
Overall dimensions: 46″ left-right, 36″ deep, 47″ tall
Approximate Weight: 6,900#

SELLING PRICE WITH ONE YEAR WARRANTY

OPTIONS:
a) Each additional platen and temperature controller – add $tbd
b) NEW electrically heated 18″ x18 ” x3″ water cooled platens with valving for water cooled and air pressurized air purging – add $tbd
c) Mold work table with bronze guide rails mounted to front of press – $tbd
d) Dual, sandwiched intermediate platen assembly, longer strain rods to render two (2) 6″ daylight openings, 1/2 Glastherm mounted on all four sides of each platen. Platens wired to separate temperature controllers, add – $tbd
e) Additional daylight opening over 13″ total add $tbd per inch
f) Power requirement for 240/3/60 upgrade sizing of electrics, ADD $tbd

F.O.B. – N.E. OHIO LOCATION

TERMS – 50% WITH ORDER TO BEGIN CONSTRUCTION
50% BALANCE DUE UPON COMPLETION OF CONSTRUCTION, PRIOR TO SHIPMENT.

12-14 week delivery from receipt of order and 50% deposit.Balance due upon completion prior to shipment.F.O.B. – N.E. OHIO LOCATION

  • SKU: 2006
  • Model #: RCM 100-18-18
Share this Product:
SKU: 2006 Categories: ,