Out of Stock SOLD. NEED ONE LIKE THIS? LET US HELP.CONTACT US

ROOK PERFECT FLOW METER MIX TWO-PART EPOXY MIXER

1 – lightly used Rook Perfect Flow 8 in. Meter Mix Machine Two Part Epoxy Mixer. Powered by an air cylinder operating two double acting piston pumps. The pumps supply metered resin and hardener to the mixer. At the mixer the materials are blended together. The machine will pump automatically as long as the run switch is on. The ratio is adjusted by sliding the pivot side (hardener pump) on the frame. The Perfect Flow 8 in. uses a forced intake pump in combination with an 8 inch air cylinder to provide output rates up to one gallon per minute. It comes with 9 ft. flex hoses a mixer manifold and a catalyst reservoir. The frame includes a mount for the resin reservoir and the intake plumbing for the reservoir. Intake plumbing will need to be 2 in. id to achieve the desired flow rates. User would need to supply the resin reservoir with heat and agitation. With heated intake hose resin side pump body heater resin side heated output hose on resin side (Fixed thermostat 110V) and recirculation system which allows material to be pumped through system and back to reservoirs. System will require a 1/2 npt port on the reservoir. This machine was used only 2 times for filling molds with highly filled epoxy 600g – 1430g/shot 100-200/day. Part A viscosity: 15-30000 cps @ 70 c (85 micron particles). Part B viscosity: 200-400 cps with a mix ratio of 13.6:100 pbv 7.5:100 pbw previous user had a 30 gallon resin reservoir with heat and agitation. Built in 2009 only used twice! F.O.B. – LOCATION

  • SKU: 7696
  • Model #: Perfect Flow 8 in.
  • Manufacturer: Rook
7696w_2_xl
7696w_3_xl
7696w_4_xl
7696w_5_xl
7696w_6_xl
7696w_7_xl
7696w_8_xl
7696w_9_xl

1 – lightly used Rook Perfect Flow 8 in. Meter Mix Machine Two Part Epoxy Mixer. Powered by an air cylinder operating two double acting piston pumps. The pumps supply metered resin and hardener to the mixer. At the mixer the materials are blended together. The machine will pump automatically as long as the run switch is on. The ratio is adjusted by sliding the pivot side (hardener pump) on the frame. The Perfect Flow 8 in. uses a forced intake pump in combination with an 8 inch air cylinder to provide output rates up to one gallon per minute. It comes with 9 ft. flex hoses a mixer manifold and a catalyst reservoir. The frame includes a mount for the resin reservoir and the intake plumbing for the reservoir. Intake plumbing will need to be 2 in. id to achieve the desired flow rates. User would need to supply the resin reservoir with heat and agitation. With heated intake hose resin side pump body heater resin side heated output hose on resin side (Fixed thermostat 110V) and recirculation system which allows material to be pumped through system and back to reservoirs. System will require a 1/2 npt port on the reservoir. This machine was used only 2 times for filling molds with highly filled epoxy 600g – 1430g/shot 100-200/day. Part A viscosity: 15-30000 cps @ 70 c (85 micron particles). Part B viscosity: 200-400 cps with a mix ratio of 13.6:100 pbv 7.5:100 pbw previous user had a 30 gallon resin reservoir with heat and agitation. Built in 2009 only used twice! F.O.B. – LOCATION

  • SKU: 7696
  • Model #: Perfect Flow 8 in.
  • Manufacturer: Rook

Out of stock

Share this Product:
SKU: 7696 Category: