Out of Stock SOLD. NEED ONE LIKE THIS? LET US HELP.CONTACT US

HOSOKAWA ACM 300 AIR CLASSIFIER MILL – C/S – 300 HP

Placeholder

1 – used Hosokawa Air Classifier Mill model ACM 300. Built in 1998 rebuilt and in storage since 2003. Gravity feed (hopper available). Air inlet via heater manifold with electric elements. Carbon steel construction. Liners are Ni-hard deflector plates ribbed. Rotor is carbon steel carbide tipped. Gravity discharge. 300 HP main drive 50 HP classifier drive. Both motors are 3/60/480 volt. Rated approx. 10-30 TPH. Variable rotor approx. 3600 RPM. Belt drive. Under driven top mounted classifier shaft through rotor shaft. Prior service: Carbon related non-hazardous minerals. With motor control center and variable frequency drive. 24 blade canted separator wheel classifier. 200 HP blower. Lube system. Bag house included (approx. $50000.00 value) assembled dims approx. 12 ft. wide x 12 ft deep x 20 ft. high. Carbon steel hot dipped galvanized 3-sections for shipping. Cone bottom on legs. approx. 3000SF 25000 cfm with 289 bags approx. 4.5 in. dia x 10 ft long. 12 in. dia 3 HP rotary airlock valve. Ductwork and associated equipment some ceramic lined. Drawings manual & support documentation available. Unit was rebuilt just before project cancellation and has been in storage since. Approx. shipping dims with bag house: 12 ft. x 12 ft. x 48 ft. long and weighs approx. 45000 lbs. According to manufactures literature this mill is suitable for alumina talc kaolin calcined coke DE TiO2 and grinds below 325 M 180-12 microns limestone approx. 30 TPH -200 mesh limestone with 15000 CFM air flow. Wollastonite approx. 12 TPH with 13000 CFM air flow. F.O.B. – LOCATION

  • SKU: 8181
  • Model #: ACM-300
  • Manufacturer: Hosokawa

1 – used Hosokawa Air Classifier Mill model ACM 300. Built in 1998 rebuilt and in storage since 2003. Gravity feed (hopper available). Air inlet via heater manifold with electric elements. Carbon steel construction. Liners are Ni-hard deflector plates ribbed. Rotor is carbon steel carbide tipped. Gravity discharge. 300 HP main drive 50 HP classifier drive. Both motors are 3/60/480 volt. Rated approx. 10-30 TPH. Variable rotor approx. 3600 RPM. Belt drive. Under driven top mounted classifier shaft through rotor shaft. Prior service: Carbon related non-hazardous minerals. With motor control center and variable frequency drive. 24 blade canted separator wheel classifier. 200 HP blower. Lube system. Bag house included (approx. $50000.00 value) assembled dims approx. 12 ft. wide x 12 ft deep x 20 ft. high. Carbon steel hot dipped galvanized 3-sections for shipping. Cone bottom on legs. approx. 3000SF 25000 cfm with 289 bags approx. 4.5 in. dia x 10 ft long. 12 in. dia 3 HP rotary airlock valve. Ductwork and associated equipment some ceramic lined. Drawings manual & support documentation available. Unit was rebuilt just before project cancellation and has been in storage since. Approx. shipping dims with bag house: 12 ft. x 12 ft. x 48 ft. long and weighs approx. 45000 lbs. According to manufactures literature this mill is suitable for alumina talc kaolin calcined coke DE TiO2 and grinds below 325 M 180-12 microns limestone approx. 30 TPH -200 mesh limestone with 15000 CFM air flow. Wollastonite approx. 12 TPH with 13000 CFM air flow. F.O.B. – LOCATION

  • SKU: 8181
  • Model #: ACM-300
  • Manufacturer: Hosokawa

Out of stock

Share this Product:
SKU: 8181 Category: