Out of Stock SOLD. NEED ONE LIKE THIS? LET US HELP.CONTACT US

100 GALLON ROSS (WUXI) DOUBLE PLANETARY MIXER – UNUSED – STAINLESS STEEL – VACUUM – JACKETED

Ross DPM 100

1 – Unused Ross-Wuxi Double Planetary Mixer Model DPM-100. Unit has a maximum recommended working capacity of 100 gallons and a full holding capacity of 115 gallons.
Unit includes the following features and specifications:
* Removable-Vessel design configured for use with multiple mixing vessels.
* Solenoid-actuated electro-hydraulic lifting system to raise and lower vacuum hood and agitators from the vessel.
* Limit switch to prevent operation of agitator drive when the vacuum hood and stirrer blades are lifted from mixing vessel.

MATERIALS OF CONSTRUCTION & FINISHES:
All product contact parts including agitators, inside of vessel and inside of vacuum hood are type 304 stainless steel polished to a 150 grit finish.

* All non-stainless steel exterior surfaces are coated with a chemical-resistant coating.

OPERATIONAL PARAMETERS:
* Unit designed for vacuum operation to 29.5″ Hg.

AGITATION SYSTEM:
* Agitation system for mixing high viscosity formulations consists two (2) rectangular planetary stirrer blades that rotate on their own axes, while revolving around a common central axis. Includes the following:
* Variable speed planetary stirrers driven by a 22 kW (30 HP), explosion proof motor, suitable for 3 phase, 50 Hz, 380 volt input, for an orbital speed range of 8 to 30 RPM, and stirrer blades on their own axes between 9 and 34 RPM.

* Separate motor cooling fan driven by a 0.09 kW (0.12 HP), explosion proof motor, suitable for 3 phase, 50 Hz, 380 volt input.

* Cast iron gearbox housing with special gearing.

* Cast iron sleeve bearing.

* Gearbox housing and sleeve bearing coated with a chemical resistant two-part coating.

* Type 304 stainless steel rectangular stirrers and stirrer shafts.

* Lip seals on stirrer shafts.

* Stainless steel revolving dust shield is positioned beneath planetary gearbox. Dust shield to include lip seals for shaft entries.

* Sidewall scraper arm.

* Variable speed is accomplished through the use of an AC variable frequency inverter drive located in the control enclosure described below.
REMOVABLE MIXING VESSEL:

One (1) stainless steel type 304 removable mixing vessel with flat bottom to include the following:

* 2″ Flush Tank Ball Valve with 2″ NPT threaded outlet connection.

* 15 psig stainless steel jacket on sides and bottom for heating and cooling.

* Thermowell in mixing vessel side with temperature probe.

* Two (2) fixed and two (2) swivel caster wheels.

* One stainless steel handle attached to the front exterior of the mixing vessel.

VACUUM HOOD:
Stainless steel type 304 vacuum hood with precision machined O-ring grooves to include the following:
* Lower flange of vacuum hood overlaps upper mix can flange.
* Upper and lower Viton O-ring seals.
* One (1) half-coupling for vacuum connection.
* One (1) 6″ charging port with stainless steel cover, gasket and clamp.
* One (1) 4″ sight port with explosion proof light.
* One (1) 3″ charging port with stainless steel cover, gasket and clamp.
* One (1) 3″ sight port with glass cover, gasket and clamp.
* One (1) 4″ sight port with glass cover, gasket and clamp.

VACUUM PUMP:
Vacuum pump mounted inside of the mixer enclosure.

CONTROLS:
Stand-alone control panel mounted in a painted steel dust-proof enclosure, suitable for operation on 3 phase, 50 Hz, 380 volt input. Panel includes the following:

* Lighted “Mixer Start” pushbutton.
* “Mixer Stop” push button.
* Speed control potentiometer.
* Digital run timer for mixer, including “Timer On / Off” selector switch.
* Digital speed indicator.
* Lighted “Vacuum Pump Start” push button.
* “Vacuum Pump Stop” pushbutton.
* Lighted “Hydraulic Pump Start” push button.
* “Hydraulic Pump Stop” push button.
* Raise / Lower selector switch.
* Digital Batch Temperature indicator.
* High Temperature alarm.
* Tank Light On / Off selector switch.
* Emergency Stop push button.
* Analog Ammeter.
* Analog Volt meter.
* Rotary fused disconnect.
* One (1) 15 HP Variable Frequency Drive (VFD) internally mounted.
* Input Voltage: 380 volts, 3 phase, 50 Hz.

  • SKU: 8836
  • Model #: DPM-100
  • Manufacturer: Ross (Wuxi)
8836w_2
8836w_3
8836w_4
8836w_5
8836w_6
8836w_7
IMG_1376
IMG_1377
IMG_1378
IMG_8218
IMG_8219
IMG_8220
IMG_8221
IMG_8222
IMG_8225
IMG_8226
IMG_8227
IMG_8357

1 – Unused Ross-Wuxi Double Planetary Mixer Model DPM-100. Unit has a maximum recommended working capacity of 100 gallons and a full holding capacity of 115 gallons.
Unit includes the following features and specifications:
* Removable-Vessel design configured for use with multiple mixing vessels.
* Solenoid-actuated electro-hydraulic lifting system to raise and lower vacuum hood and agitators from the vessel.
* Limit switch to prevent operation of agitator drive when the vacuum hood and stirrer blades are lifted from mixing vessel.

MATERIALS OF CONSTRUCTION & FINISHES:
All product contact parts including agitators, inside of vessel and inside of vacuum hood are type 304 stainless steel polished to a 150 grit finish.

* All non-stainless steel exterior surfaces are coated with a chemical-resistant coating.

OPERATIONAL PARAMETERS:
* Unit designed for vacuum operation to 29.5″ Hg.

AGITATION SYSTEM:
* Agitation system for mixing high viscosity formulations consists two (2) rectangular planetary stirrer blades that rotate on their own axes, while revolving around a common central axis. Includes the following:
* Variable speed planetary stirrers driven by a 22 kW (30 HP), explosion proof motor, suitable for 3 phase, 50 Hz, 380 volt input, for an orbital speed range of 8 to 30 RPM, and stirrer blades on their own axes between 9 and 34 RPM.

* Separate motor cooling fan driven by a 0.09 kW (0.12 HP), explosion proof motor, suitable for 3 phase, 50 Hz, 380 volt input.

* Cast iron gearbox housing with special gearing.

* Cast iron sleeve bearing.

* Gearbox housing and sleeve bearing coated with a chemical resistant two-part coating.

* Type 304 stainless steel rectangular stirrers and stirrer shafts.

* Lip seals on stirrer shafts.

* Stainless steel revolving dust shield is positioned beneath planetary gearbox. Dust shield to include lip seals for shaft entries.

* Sidewall scraper arm.

* Variable speed is accomplished through the use of an AC variable frequency inverter drive located in the control enclosure described below.
REMOVABLE MIXING VESSEL:

One (1) stainless steel type 304 removable mixing vessel with flat bottom to include the following:

* 2″ Flush Tank Ball Valve with 2″ NPT threaded outlet connection.

* 15 psig stainless steel jacket on sides and bottom for heating and cooling.

* Thermowell in mixing vessel side with temperature probe.

* Two (2) fixed and two (2) swivel caster wheels.

* One stainless steel handle attached to the front exterior of the mixing vessel.

VACUUM HOOD:
Stainless steel type 304 vacuum hood with precision machined O-ring grooves to include the following:
* Lower flange of vacuum hood overlaps upper mix can flange.
* Upper and lower Viton O-ring seals.
* One (1) half-coupling for vacuum connection.
* One (1) 6″ charging port with stainless steel cover, gasket and clamp.
* One (1) 4″ sight port with explosion proof light.
* One (1) 3″ charging port with stainless steel cover, gasket and clamp.
* One (1) 3″ sight port with glass cover, gasket and clamp.
* One (1) 4″ sight port with glass cover, gasket and clamp.

VACUUM PUMP:
Vacuum pump mounted inside of the mixer enclosure.

CONTROLS:
Stand-alone control panel mounted in a painted steel dust-proof enclosure, suitable for operation on 3 phase, 50 Hz, 380 volt input. Panel includes the following:

* Lighted “Mixer Start” pushbutton.
* “Mixer Stop” push button.
* Speed control potentiometer.
* Digital run timer for mixer, including “Timer On / Off” selector switch.
* Digital speed indicator.
* Lighted “Vacuum Pump Start” push button.
* “Vacuum Pump Stop” pushbutton.
* Lighted “Hydraulic Pump Start” push button.
* “Hydraulic Pump Stop” push button.
* Raise / Lower selector switch.
* Digital Batch Temperature indicator.
* High Temperature alarm.
* Tank Light On / Off selector switch.
* Emergency Stop push button.
* Analog Ammeter.
* Analog Volt meter.
* Rotary fused disconnect.
* One (1) 15 HP Variable Frequency Drive (VFD) internally mounted.
* Input Voltage: 380 volts, 3 phase, 50 Hz.

  • SKU: 8836
  • Model #: DPM-100
  • Manufacturer: Ross (Wuxi)

Out of stock

Share this Product:
SKU: 8836 Category: