40 GALLON ROSS POWERMIX PLANETARY DISPERSER - S/S - VACUUM - JACKETED

One rebuilt Ross Planetary Disperser (Powermix) Mixer model PD-40, including the following features and specifications:

The mixer is equipped with a Delroyd model HV-70 gear reducer. The gear reducer has been inspected and found to be in good mechanical condition. All oil seals will be replaced. The reducer will be filled with sulfur-free worm gear lubricant.

The mixer includes a 10 HP, 1,750 rpm, 230/460 volt, TEFC motor for the high speed disperser and a 7.5 HP, 1,750 rpm, 230/460 volt, TEFC motor for the planetary blade. Note: no motor starter or inverter is included in this proposal.

The planetary gearbox is carbon steel. The planetary gears have been inspected and found to be in good condition. All bearings and bushings inside the planetary gearbox and sleeve bearing assembly will be replaced with new.

The used rectangular style stirrer is type 304 stainless steel.

The disperser shaft is supported by two pillow block bearings. Both bearings will be replaced with new.

The vacuum hood is made from type 304 stainless steel. The hood includes two 3” sight/charge ports with Cherry-Burrell connections, one 6” sight/charge port with a Tri-Clamp connection and one 1” NPT port for connecting to a vacuum pump.

This proposal includes a used, type 304 stainless steel mix can with a 150 psi rated dimple jacket. The mix can is suitable for operation under full vacuum and includes a manually operated 3” flush bottom ball valve. Note: we can build new mix cans (jacketed or non-jacketed) to suit specific needs.

The mixer is raised by an air/oil hydraulic lift. The lift will have new packing installed. The lift is controlled by a hand operated air valve, and a foot operated hydraulic valve.

The machine’s base is fabricated from steel channel and is 6” high.

• We will paint all exterior parts of the machine with “Heavy Duty Machine Teal” (see our website) oil-based industrial enamel paint. All non-stainless steel surfaces inside the hood including the gearbox, the exposed upper part of the cast iron sleeve bearing and the underside of the drive bonnet (inside the hood) with be coated with “Steel-it” stainless steel filled paint.

F.O.B. - LOCATION 

SHIPMENT: Approximately 6 - 8 weeks after receipt of order and down payment.

NOTES AND EXCEPTIONS:

No motor starters, VFDs (inverters), safety limit switches, etc. are provided in this proposal. It is the end user’s responsibility to comply with any federal, state or local codes and ordinances.

WARRANTY:

Our supplier warrants the mechanical components of the machine for a period of one year from purchase with the exception of normal wear items such as seals and O-rings or any damage due to improper use or abuse. Bent shafts and any related damage caused by this type of failure are examples of improper use or abuse that are not covered under this warranty.