500 GALLON VACUUM DISPERSER - 75 HP/XP

75 HP/XP 500 GALLON VACUUM DISPERSER

Material Finish:

• Internal Surface Finish: #4 Finish w/ Surfaces Ground and Polished

• External Surface Finish: 2B Finish w/ Sharp Edges & Weld Discoloration Removed (weld bead is still visible)

• Passivation: None

• Vessel Design: Vacuum Rated

Top Head:

• Top Head: Dished Head, 304SS Shell:

• Shell Dims: 52" Outside Diameter x 60" Straight Side Height, 304 Stainless Steel

• Working Volume: 500 Gallons

• Baffles: No

Bottom Head:

• Bottom Head: Dished Head, 304SS Heating and Cooling:

• Jacket: Non-ASME Dimple Jacket, Shell and Bottom Head

• ASME Code Stamp: Yes, 100 PSI @ 450F Design

• Insulation: Shell and Bottom Head Fittings:

• 10" 150# ANSI Flange in Top Head

• 20" Non-Pressure Manway in Top Head for Access

• 1" NPT Fitting in Top Head for Vacuum

• (2) 150 2" 150# ANSI Flanges in Top Head as Inlets

• 150 3" 150# ANSI Flange in Bottom Head for Drain

Supports:

• Legs: (4) Pipe Legs, 304 Stainless Steel

• Feet: Bolt Down Flanges/Plates

• Casters: None

• Clearance to the Floor: 12"

• Fork Pockets: No

• Lifting Lugs: (2) Lifting Lugs

--- DPT Flange Mount Mixer--

• Motor: 75 HP, XPFC Inverter Duty, Class 1, Div 1, Group C&D; Class 2, Div 1, Group F&G, Temp Code T3C, 2:1 Turndown, 208-230/460V, 3Ph, 1780 RPM

• Control: Speed Controller in Type 4X Washdown Enclosure (Mounted Outside of XP Area)

- Factory Programmed

- Digital RPM Readout, Range 100-1300 RPM (No Run 375 563RPM)

- 460V / 3 Ph / 60Hz, Bare Wire Terminals

- Local XP Control Package, Bare Wire Leads, Shipped Loose

• Mount: 10" 150lb ANSI Flange w/ Belt Drive Pedestal

• Bearing: CS Bearing, 4-Hole Flange Mounted

• Seal: 316 SS 60 Series 2-Piece Mechanical Inside Seal w/FFKM O-Rings; Carbon-Graphite Rotary, Sintered Silicon Carbide Stationary, Hastelloy C-276 Springs, Dry Running, For Pressure/Vacuum

• Shaft: 2” Diameter x 66" Exposed Length, 316SS TGP

• Impeller: 16" Dispersion Blade, High Shear, 316SS, w/ Hub and Stiffening Plate

*Final Design and Fittings Package TBD with Engineering Drawing Revision and Reviews. Additional features to incur further costs for material and labor.