1000 GALLON DUAL SHAFT MIXER - S/S - VACUUM - JACKETED

NEW MADE TO ORDER 1,000 GALLON DUAL SHAFT MIXER

---1000 Gallon 304SS Tank--

Material Finish:

• Internal Surface Finish: #4 Sanitary Finish w/ Surface Ground Smooth, Polished & Buffed
• External Surface Finish: 2B Finish w/ Sharp Edges & Weld Discoloration Removed (Weld Bead Still Visible)
• Passivation: None
• Design: For Full Vacuum Pressure

Top:

• Top Head: Dished, 304SS
• Mixer Mount: Pipe Bridge For Plate Mounted Anchor

Shell:

• Shell Dims: 72" Outside Diameter x 62" Straight Side Height, 304SS
• Shell Volume: 1000 Gallons
• Baffles: None

Bottom:

• Bottom Head: Dished, 304 Stainless Steel
• Mixer Mount: Flange Mount, 12' CL150, 304SS Wetted in Top Head for Anchor Mixer Mount; 12" Flange Mount w/ Belt Drive Pedestal, 304SS Wetted in Top Head for Disperser Mixer Mount

Heating and Cooling

• Jacket: Dimple Jacket, ASME Rated, Shell and Bottom Head, NPT Inlets/Outlets, Relief Valve In Line By Others
• Design: 125 PSIG at 250°F
• ASME Code Stamp: Yes
• Insulation: Yes, Shell and Bottom Head

Fittings

• 24" Manway in Top Head
• (4) 2" Triclamp Ferrules in Top Head for Inlets
• 1" Triclamp Ferrule in Top Head for Vacuum
• 4" Triclamp Ferrule in Bottom Head for Drain

Supports

• Legs: (4) Pipe Legs, 304 Stainless Steel
• Feet: Bolt Down Flange
• Casters: None
• Clearance to the Floor: 12"
• Fork Pockets: None
• Lifting Lugs: (2) Lifting Lugs

*Heads: 8mm, Liner: 8mm, Jacket: 2mm, Ext Heads: 3mm, Wrap: 2mm

---30HP XP Anchor Mixer--

• Motor: 30 HP, XPFC Inverter Duty, Class 1, Div 1, Group C&D; Class 2, Div 1, Group F&G, Temp Code T4, 6:1 Turndown, 208-230/460V, 3Ph, 1770 RPM 
• Gearbox: 30 RPM (58.44:1), Helical Bevel Gearmotor, Hollow Shaft
• Control: 30HP Speed Controller with Digital RPM Readout in Indoor Rated IP55/NEMA 12 Enclosure, 480V/3Ph (Mounted Outside of XP Area) w/ Local XP Control Package, 6 to 30 RPM, Bare Wire Leads, Shipped Loose
• Mount: Flange Mount, 12' CL150, 304SS Wetted
• Seal: 316 SS 60 Series 2-Piece Mechanical Inside Seal w/Viton O-Rings; Carbon-Graphite Rotary, Sintered Silicon Carbide Stationary, Hastelloy C-276 Springs, Dry Running
• Shaft: 4" OD, 304SS
• Impeller: Bolt-on Anchor and Helical Assembly, Tube and Flat Bar Construction, 304SS, Nylon Scrapers

---75HP XP Disperser---

• Motor: 75 HP, XPFC Inverter Duty, Class 1, Div 1, Group C&D; Class 2, Div 1, Group F&G, Temp Code T3C, 2:1 Turndown, 208-230/460V, 3Ph, 1780 RPM
• Belt-Drive: Belt-Driven to achieve 950 RPMs for Optimal dispersion
• Control: 75HP Speed Controller with Digital RPM Readout in Indoor Rated IP55/NEMA 12 Enclosure, 480V/3Ph (Mounted Outside of XP Area) w/ Local XP Control Package, 190 to 950 RPM (No Run: 581 to 871 RPMs for Shaft Critical), Bare Wire Leads, Shipped Loose
• Mount: 10" Flange Mount w/ Belt Drive Pedestal, 304SS Wetted
• Shaft: 2.5" Dia., 54" Exposed Length, 304SS
• Seal: 316 SS 60 Series 2-Piece Mechanical Inside Seal w/Viton O-Rings; Carbon-Graphite Rotary, Sintered Silicon Carbide Stationary, Hastelloy C-276 Springs, Dry Running
• Impeller: 20" Ultra High Shear Dispersion Blades, Hub w/ Stiffening Plate, Impeller Bolted to Hub, 304SS

Made in the USA

Quote is good through 2/28/26.

Est. Current Lead Time As Of 2/13/26: 90 days after receipt of approved drawing