2002 Schold 40/15/10 TRIAX
Sold
Description
AARON # (1 ON WEB 7/23/14)43223002 $59500 ea. Less 15%F.O.B. - CHICAGO IL43223001002 in Cleveland the other 4 are hereJV W/FEDERAL - SEE FEDERAL #S 35847 & 35843Schold - 40/15/10 TRIAXStock # 43223008 HP 40Category Mixers Material Subcategory Disperser Mixer Manufacturer ScholdCondition USED Model 40/15/10 TRIAXUsed- Schold Concentric Triple Shaft Tri-axial Disperser 304 Stainless Steel. (1) High speed shear blade driven by a 40 hp 3/60/230/460 volt 1800 rpm XP motor speed range 0-1750 rpm (1) Intermediate speed bar turbine blades driven by a 15 hp 3/60/230/460 volt 1200 rpm XP motor speed range 0-600 rpm (1) Low speed Anchor type blade with scrapers driven by a 10 hp 3/60/230/460 volt 1800 rpm XP motor speed range 0-30 rpm. 5 hp 3/60/230/460 volt 1740 rpm XP hydraulic lift 60'' rise 189'' overall lift height. Includes a Roben kettle 350 gallon 304 stainless steel vertical. 46'' Diameter x 46'' straight side Flat clamp on top dished bottom. Internal rated 5 psi at –20 to 250 degrees F. carbon steel jacket rated –8VAC/60 psi at –20 to 250 degrees F. 3’’ Center bottom outlet mounted on 4 carbon steel legs. National Board # 9568 serial # 21011-1 built 2002. (1) Maso-Sine discharge pump model SPS-3’’ stainless steel. Approximate capacity (0.45) Liter per revolution maximum particle size 25mm viscosity over 1.000.000 CP. Driven by a 7-1/2 hp 3/60/208-230/460 volt 1760 rpm XP motor thru a reducer ratio 6.69 to 1 serial# 85711101.Do you have an item like this for sale? Sell us yours.
Specifications
| Manufacturer | Schold |
| Model | 40/15/10 TRIAX |
| Year | 2002 |
| Condition | Used |
| Serial Number | 21011-1 |
| Stock Number | 7302 |
| Machine id | 7489 |
| Machine description | 350 GALLON SCHOLD TRI-AXIAL MIXER - S/S - JACKETED |
| Machine code | 05J |
| Equipped with | 1 - used 350 gallon Schold Concentric Triple Shaft Tri-Axial Disperser. Model 40/15/10 TRIAX. T-304 stainless steel contact parts. Agitation consists of (1) 40 HP High Speed Disperser with 0-1750 RPM speed range (1) 15 HP Turbine Blade shaft with 0-600 RPM speed range and (1) 10 HP Low Speed Anchor Blade with a speed range of 0-30 RPM. All agitation motors are 3/60/230/460V and XP. With a 5 HP/XP 3/60/230/460V electric/hydraulic lift allowing for 60 in. of rise and an overall lifted height of 189 in. (1) approx. 350 gallon Roben Kettle T-304 stainless steel approx. 46 in. dia. x 46 in. straight side. Flat clamp top and dished bottom. Internally rated 5 psi @ -20 to 250 deg. F. Carbon steel jacket rated -8Vac/60 psi @ -20 to 250 deg. F. 3 in. center bottom outlet. Tank mounted on (4) carbon steel legs. Unit built in 2002. National Board stamped. With (1) Maso-Sine discharge pump model SPS-3 in. driven by a 7.5 HP/XP 3/60/208-230/460V motor thru 6.69:1 ratio reducer. Stainless steel. Approximate capacity (0.45) Liter per revolution maximum particle size 25mm viscosity over 1.000.000 CP. F.O.B. - LOCATION |
| Status | S |
| Subcategory sort | 350.0 |