CMX MSX-2000L

CMX (QUOTED 10/27/14 - PRICE GOOD-60 DAYS)$165500 LESS 10%addl. mix cans $23000 ea. LESS 10%NEW DISCHARGE RAM: $90000.00 LESS 10%F.O.B. - BOHEMIA NYCONTACT DOUG COHEN FORMORE INFORMATION 10/27/14 QUOTE FROM DOUGCOVERING:One (1) CMX Dual Shaft Mixer Model MSX-2000L. Unit has a maximum recommendedworking capacity of 500 gallons and a full holding capacity of 615 gallons. Unit includesthe following features and specifications:CONFIGURATION & COVER LIFTING SYSTEM:„h Removable-Vessel design configured for use with multiple mixing vessels.„h Compressed Air / Oil hydraulic lifting system to raise the vacuum hood and agitatorsfrom the vessel (90 psig required).„h Limit switches to prevent operation of agitator drives when the vacuum / pressure coveris lifted from mixing vessel or when the mixing vessel is removed from the mixingposition.- Page 2 -373 Nesconset HighwaySuite 116Hauppauge NY 11788Toll-Free: (855) 885-0269info@cmxprocess.comwww.cmxprocess.comMATERIALS OF CONSTRUCTION & FINISHES:„h All product contact parts including agitators inside of vessel and inside of vacuumhood to be type 304 stainless steel polished to an 80 grit finish with all internal weldsground and polished.„h All non-stainless steel exterior surfaces to be primed and painted with a 2 part epoxy orurethane coating.„h All elastomers (including mechanical seal O-rings) to be Viton.„h Exterior of vessel and vacuum cover to be polished to an 80 grit finish.OPERATIONAL PARAMETERS:„h Unit designed for operation under full vacuum up to 29.5¡¨ Hg (-1 BarG).AGITATION SYSTEM:Agitation and homogenization system consists of two independently driven top-enteringagitators including:„h Three-wing anchor agitator with self-adjusting Teflon scrapers driven at 23 rpm by a 30HP 460 volt 3 phase 60 Hz TEFC motor. Anchor to include hinged Teflon wall andbottom scrapers.„h High speed modified sawtooth disperser driven at 1350 rpm by a 60 HP 460 volt 3phase 60 Hz TEFC motor. Disperser to have a 14¡¨ diameter disperser blade.„h Shaft sealing arrangement utilizes single mechanical seals with Viton O-rings andcarbon vs. ceramic seal faces.„h Agitators polished to an 80 grit finish.- Page 3 -373 Nesconset HighwaySuite 116Hauppauge NY 11788Toll-Free: (855) 885-0269info@cmxprocess.comwww.cmxprocess.comREMOVABLE VACUUM MIXING VESSEL:Stainless steel type 304 removable vacuum vessel with flat bottom to include the following:„h Stainless steel type 304 jacket on the sides and bottom designed for 50 psig.„h 3¡¨ Flush Tank Ball Valve with 3¡¨ FNPT threaded outlet connection.„h Two (2) fixed and two (2) swivel caster wheels.„h Push / pull handle.„h Interior and exterior of vessel polished to an 80 grit surface finish.VACUUM / PRESSURE COVER:Stainless steel type 304 vacuum cover to include the following:„h Two (2) 3¡¨ diameter combination sight and charge ports with Pyrex glass Viton gasketand sanitary clamp.„h One (1) 1¡¨ half- coupling for vacuum gauge.„h Interior and exterior of vacuum / pressure cover polished to an 80 grit surface finish.CONTROLS:Controls not included.in this proposal but can be quoted upon receipt of informationconfirming the enclosure rating.PRICE F.O.B. BOHEMIA NY:¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K..¡K.¡K¡K¡K¡K...$165500.00SHIPMENT: 14 ¡V 16 weeks after receipt of order and down payment.TERMS: 50% down payment with order 25% progress payment upon completion andcustomer inspection balance net 30 days after shipment.- Page 4 -373 Nesconset HighwaySuite 116Hauppauge NY 11788Toll-Free: (855) 885-0269info@cmxprocess.comwww.cmxprocess.comOPTIONAL ADDITIONAL REMOVABLE VACUUM MIXING VESSEL:Stainless steel type 304 removable vacuum vessel with flat bottom to include the following:„h Stainless steel type 304 jacket on the sides and bottom designed for 50 psig.„h 3¡¨ Flush Tank Ball Valve with 3¡¨ FNPT threaded outlet connection.„h Two (2) fixed and two (2) swivel caster wheels.„h Push / pull handle.„h Interior and exterior of vessel polished to an 80 grit surface finish.„h Stainless steel handles attached to the exterior of the mixing vessel.PRICE:¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K..¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K..¡K¡K¡K¡K...$23000.00OPTIONAL FLOOR-MOUNTED DISCHARGE SYSTEM:One (1) CMX Floor Mounted Discharge System Model DSX-2000 for use with CMX 500gallon mixing vessels:„h Heavy duty support structure fabricated in carbon steel and finished with a twocomponentepoxy paint.„h Platen with carbon steel wetted parts and Viton sealing O-ring.- Page 5 -373 Nesconset HighwaySuite 116Hauppauge NY 11788Toll-Free: (855) 885-0269info@cmxprocess.comwww.cmxprocess.com„h Platen is activated by means of a self-contained hydraulic power unit driven by a 480volt 3 phase 60 cycle TEFC motor. A hydraulic pressure gauge four-way hydraulicvalve to raise and lower the platen and an operator stop/start station are provided.„h The pressure under the platen is 25 psi.PRICE:¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K..¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K..¡K¡K¡K¡K...$90000.00ORDERING INFORMATION:Any orders resulting from this proposal should be made out to:CMX Process Technologies373 Nesconset Highway / Suite 116Hauppauge NY 11788Orders may be faxed to (631) 750-9191 or e-mailed to info@cmxprocess.com