1987 Berstroff ZE 40

SOLD Perry #7785-1 - AVAIL 10/30/08PRICE REDUCED TO $37500 LESS 15% (CHANGED IN MACDB ON 11/8/07)AEC less 15% (10/9/07) HAINESPORT NJTALK TO STORERO (PLASTIC PIECE)Still available:* 7785-1 a) Is it designed to process PET chips?NO but you can purchase different segments from Berstorffb) Is there any facilty to add additives in the extruder? Yes it has three vent sectionsc) What is the operating capacity of the machine?Berstorff rates the unit at approximately 200 lbs. an hrThank you for your quotation.Regarding the 2935 - 40 MM BERSTROFF CO-ROTATING TWIN SCREW I need also the following points:1-Are you the seller or is this from your customer? * I AM SELLING THIS ON BEHALF OF A CUSTOMER2-Last date of production of this machine? Since which year is on stock?20003-App. capacity in kg/hg * APP. CAPACITY IN kg/hg approx. 100 kgs/hr4-is it ready for production or should be repaired or overhauled? * we have test run the unit. We do not know if the screws are what you would require for your product.5-is the machine completely? * the machine is complete6- do you give function guarantee?* we would test run at our shop to your final acceptance. Once it leaves our facility there is no guarantee.Please if possible send me some clear photos.* see attached.7/19/06 - cust #26427 - There is interest in the extruder. I've passed this information on to the project manager(s) for review and awaiting the next direction they want to take. In addition to looking for extruders we are also researching companies to refurbish the unit so we have two different things going on. Thanks for the follow up.7/10/06 - cust #26427 - Can the extruder #2935 be viewed? If so where's the location? (left msg for Mike Ricchini to confirm availability) 7/10 -per vendor - unit is still available & located in Hainesport* prior use - foam rubber for insulation on pipes. was also used in tandem with a 75 mm berstorff1/5/04cust #19865 questions re: #2935 & 2936 - Working or not? Condition? Any modifications needed? Is video available of in use? Price? Negotiable? Type of product? hot melt for the sensitive tape? (1/5 - questions to vendor) - per vendor - Panel needs to be over hauled.-No video available.- Was used for PE foam insulation for wire.INNO-TECH PLASTICS WANTS TO KNOW:does whole panel needs to be overhauled or just temperature portion of it?- the * drive panel is ok - for motors. everything else is just a shell (no guts)(Reliance Scr control - 40 HP)overall condition - pretty decent condition.better picture showing screws.is it complete aside from temp. controller?we believe so.ANDY STORERO - PERRY VIDEX - 7785-1 - (AEC #2935 FOR INNOTECH PLASTICS)